2.7 CONNECTIONS
2.7.1 Connecting to the PBX
The KX-TVP50 can be connected to up to 2 extension ports of the PBX. Use a 4-conductor
wire for connection with KX-TA systems that uses APT Integration, and for connection with
KX-TD systems that use DPT Integration. Use a 2-conductor wire for connection to all other
PBXs.
4-Conductor Wire
Modular Connection
B: BLACK
R: RED
G: GREEN
Y: YELLOW
2.7.2 Opening the Ferrite Core
Insert a flathead screwdriver into each opening of the ferrite core and unlatch the cover as
shown below.
Connect a 4-conductor wire or 2-conductor wire to the KX-TVP50 and run the wire through
the ferrite core (see following pages). Close the ferrite core.
Installation Manual
Y
G
R
B
Outer Pins
Inner Pins
INSTALLATION
Y
G
R
B
35