Yamaha V Star 950 Service Manual page 65

1. Brake fluid reservoir
2. Clip
3. Brake fluid reservoir hose
4. Rear brake master cylinder
5. Rear brake hose
6. Clamp
7. Rear brake hose holder
8. Rear brake light switch
9. Rear brake light switch lead
10.Brake fluid reservoir cover
A. Face the clip's knob of the reservoir tank
side to front and master cylinder side to
inside.
B. Make sure to insert the reservoir hose to
the brake fluid reservoir and rear brake
master cylinder.
C. Face the opening of the hose clamp out-
ward.
D. Make sure to insert the O
to the clamp.
E. When installing the grommet, soapsuds
can be applied.
F. Install the rear brake hose with its paint
mark facing up.
G. Install the rear brake hose onto the rear
brake caliper, making sure that the brake
pipe touches the projection on the caliper.
H. Make sure to insert the clamp.
I. Install the rear brake hose onto the rear
brake master cylinder, making sure that the
brake pipe touches the projection on the
rear brake master cylinder bracket.
J. 90°
K. Install the clamp under the reservoir tank
ahead of the line and toward the direction
of the arrow.
L. Clamp the rear brake light switch lead and
reservoir hose protector. Face the opening
in any direction.
M. Make sure to put the horn stay against the
stopper.
N. When installing the brake fluid reservoir
hose, face the paint (ø5) inside.
O. Face the opening of the hose clamp
upward.
P. Make sure to route the rear brake hose
through the rear brake hose holder.
sensor coupler
2
2-44
CABLE ROUTING