Yamaha V Star 950 Service Manual page 38

Item
Speed sensor bolt
Speed sensor bracket bolt
Speed sensor lead bracket screw
TIP
Cylinder head nut
1. Apply engine oil on the screw part of the bolt and both sides of the washer well.
2. Follow the tightening direction and tighten to 15 Nm (1.5 m·kgf, 11 ft·lbf).
3. Follow the tightening direction and tighten to 25 Nm (2.5 m·kgf, 18 ft·lbf).
4. Follow the tightening direction and tighten to 65 Nm (6.5 m·kgf, 47 ft·lbf).
Front cylinder head
Rear cylinder head
TIP
Connecting rod bolt
Tighten the connecting rod bolts to 15 Nm (1.5 m·kgf, 11 ft·lbf), and then tighten them further to
reach the specified angle 125–135°.
Thread
Q'ty
size
M6 1 10 Nm (1.0 m·kgf, 7.2 ft·lbf)
M6 2 10 Nm (1.0 m·kgf, 7.2 ft·lbf)
M6 1 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
2-17
TIGHTENING TORQUES
Tightening torque Remarks
LT