Assembling The Crankcase - Yamaha V Star 950 Service Manual

Bearing retainer bolt
12 Nm (1.2 m·kgf, 8.7 ft·lbf)
LOCTITE®
a
1
EAS25700

ASSEMBLING THE CRANKCASE

1. Thoroughly clean all the gasket mating sur-
faces and crankcase mating surfaces.
2. Apply:
• Sealant
(onto the crankcase mating surfaces)
Yamaha bond No. 1215
90890-85505
(Three bond No.1215®)
TIP
Do not allow any sealant to come into contact
with the oil gallery.
3. Install:
• Left crankcase
(onto the right crankcase)
TIP
Tap lightly on the left crankcase with a soft-
face hammer.
4. Install:
• Crankcase bolts (M10)
• Crankcase bolts (M6)
• Oil baffle plate 1 bolts
Crankcase bolt (M10)
36 Nm (3.6 m·kgf, 25 ft·lbf)
Crankcase bolt (M6)
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Oil baffle plate 1 bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
TIP
• Apply locking agent (LOCTITE®) to the
threads of the right crankcase bolts and oil
baffle plate 1 bolts.
• Tighten the crankcase bolts in the proper
tightening sequence as shown in the illustra-
tion.
• M10 × 110 mm bolts
• M6 × 120 mm bolts: "a"
• Oil baffle plate 1 bolts: "b"
• M6 × 80 mm bolts
A. Right crankcase
B. Left crankcase
5-63
CRANKCASE