Installing The Swingarm - Yamaha V Star 950 Service Manual

6. Check:
• Spacer
Damage/scratches → Replace.
EAS28780

INSTALLING THE SWINGARM

1. Lubricate:
• Bearings
• Spacers
• Dust covers
• Pivot shaft
Recommended lubricant
Lithium-soap-based grease
2. Install:
• Bearings "1"
2. Swingarm
A. Left side
B. Right side
Installed depth "a"
0–1.0 mm (0–0.04 in)
3. Install:
• Pivot shaft nut
Pivot shaft nut
85 Nm (8.5 m·kgf, 61 ft·lbf)
4. Adjust:
• Drive belt slack
Refer to "ADJUSTING THE DRIVE BELT
SLACK" on page 3-18.
4-66
SWINGARM