Yamaha V Star 950 Service Manual page 42

TIGHTENING TORQUES
TIP
Passenger seat bolt
Tighten the left side first, then the right side.
TIP
Front wheel axle pinch bolt
Tighten the front wheel axle pinch bolts to specification twice. Tighten the inside and outside bolts
alternately, starting with the inside bolt.
TIP
Lower ring nut
1. First, tighten the lower ring nut to approximately 52 Nm (5.2 m·kgf, 37 ft·lbf) with a torque
wrench, then loosen the lower ring nut completely.
2. Retighten the lower ring nut to 18 Nm (1.8 m·kgf, 13 ft·lbf) with a torque wrench.
TIP
Upper handlebar holder bolt
First, tighten the bolts on the front side of the upper handlebar holder, and then on the rear side.
TIP
Front brake master cylinder holder bolt
First, tighten the upper bolt, then the lower bolt.
2-21