Required Tools; Unpacking The Shelf And Power Supply; Installing An Stk-Rps-150Ps Into A Shelf; Contents Of Stk-Rps-150Ch2 Carton - Enterasys A4H124-24FX Hardware Installation Manual

• STK-RPS-150CH2, a two-slot chassis
• STK-RPS-150CH8, an eight-slot chassis
Note: The STK-RPS-150PS can also be installed in the old two-slot and eight-slot chassis,
C2RPS-CHAS2 and C2RPS-CHAS8.

Required Tools

A flat-blade screwdriver is required to install the STK-RPS-150CH2 or STK-RPS-150CH8 shelf and
STK-RPS-150PS power supplies.

Unpacking the Shelf and Power Supply

The shelf and the power supply are shipped separately. To unpack these devices proceed as
follows:
1. Open the box and remove the packing material protecting the shelf or power supply.
2. Verify the contents of each carton and compare the contents shipped with those listed in
Table 2-1, Table
3. Perform a visual inspection of the components for any signs of physical damage. Contact
Enterasys Networks if there are any signs of damage. Refer to
details.
Table 2-1 Contents of STK-RPS-150CH2 Carton
Item
STK-RPS-150CH2
Quick Reference
Table 2-2 Contents of STK-RPS-150CH8 Carton
Item
STK-RPS-150CH8
Quick Reference
Table 2-3 Contents of STK-RPS-150PS Carton
Item
STK-RPS-150PS 150 watt DC power supply
USA, NEMA power cord
RPS cable (1 meter in length)
Notice card

Installing an STK-RPS-150PS Into a Shelf

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive electronic
equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones de
seguridad para evitar descargas de electricidad estática.
If you are using the STK-RPS-150PS as a standalone unit, go to
Power Cord" on page 2-16.
2-2, and Table 2-3.
Enterasys A4 Fast Ethernet Switch Hardware Installation Guide 2-11
Installing and Connecting a Redundant Power System
"Getting Help" on page xvii for
"Connecting the RPS Cable and AC
Quantity
1
1
Quantity
1
1
Quantity
1
1
1
1