Download Print this page

Honeywell TRS-3300 Installation And Operating Instructions Manual page 39

Hide thumbs


Installation and Operating Instructions TRS 33xx
b) Terminal is online, but answer from time recording software takes too long
The terminal is situated in basic condition (see chapter 6.1.1) and awaits key activity. The employee
presses the key assigned with "Clock-out", the terminal expects the entry, presented by the symbol:
The employee books, the entry is processed in the time recording software. Depending on the duration
of the processing, an hour glass can briefly be displayed. If the terminal can receive the data within the
time defined in System-Setup (see chapter 5.1.2, step 12), the code number of the ID card and the
confirmation "Clock-out entered" will be displayed in the left upper corner. The center of the display
indeed shows the information set as standard display type in the System-Setup (see chapter 5.1.2, step
14), in this example "Balance", but the current value can not be calculated. The last value stored in the
terminal followed by two exclamation marks will be displayed instead:
Additionally, the symbol to the left is displayed, which means the entry has been
processed correctly. It is buffered in the terminal and will be transmitted to the time
recording software, as soon as the communication can be re-established.



  Related Manuals for Honeywell TRS-3300

This manual is also suitable for: