Technical Data - Honeywell TRS-3300 Installation And Operating Instructions Manual

Installation and Operating Instructions TRS 33xx

11. Technical Data

Rated operating voltage U
Operating voltage range:
Max. residual ripple of supply voltage:
Current consumption
typ
Current consumption
max.
Operating temperature range:
Storage temperature range:
Humidity:
Protection class according to DIN 40050:
Environment class according to VdS
Fuse FS 1 (internal):
Fuse FS 2 (reader, U
ext
Weight:
Display:
Color:
Only use a 12 V power supply unit with an output voltage without ground potential and a maximum
power current of 8 A.
Line cross section:
A maximum current drain of 1 A is allowed (internal reader connector + bus module
terminals),altogether protected by FS2.
(*) Note, that the output voltage U
an operating voltage must be chosen to guarantee an operation of the readers, bus modules etc.
according to their specifications.
(**) The constructional properties of the consistence of the wall must comply with the IP class
requirements. Use the included sealing and assemble the device according to IP 53 (see also chapter
3 = mounting).
:
DC
with 12 V:
, module bus):
up to 5 m line length min. 0,4 mm²
up to 15 m line length min. 0,75 mm²
depends on the operating voltage (U
ext
12 V DC
Item no. 029802.UL:
Item no. 029803.UL:
Item no. 029804.UL:
35 mV
Item no. 029802.UL:
Item no. 029803.UL:
Item no. 029804.UL:
700mA
0 C to +45 C
-25 C to +70 C
up to 95% without condensation
IP 53 (**)
II
0,5 AT / 250 V
1 AT / 250 V
0,9 kg
240 x 128 pixel graphic LC-Display with background
illumination
Center part anthracite, similar to RAL 7016
side parts white/alu, similar to RAL 9006
8 V DC to 32 V DC (*)
10 V DC to 16 V DC (*)
9 V DC to 31 V DC (*)
280 mA
300 mA
300 mA
= U - 1,4 V). That means that
ext in
57