Start System-Setup - Honeywell TRS-3300 Installation And Operating Instructions Manual

Installation and Operating Instructions TRS 33xx

5.1.1 Start System-Setup

As long as the settings in the System-Setup have not been carried out, the device is not able to
communicate with the time recording software. Due to this reason the Offline symbol (a) is displayed.
The request to enter the system code is prompted:
The system code is to be entered via the numeric keys of the decimal keypad. It is hidden displayed by
*
" " (in the example above already four of eight numbers are entered). Confirm your entry with the
<ENTER> softkey, or use <ESC> to abort. Confirming a wrong entry with <ENTER> causes a
termination (initial state see above). The entries must be repeated.
The system code for the TRS 33xx is:
3 4 2 4 3 1 3 1
17