Installation and Operating Instructions TRS 33xx
14. Standard display type parameter:
(Applies only when the "Ignore logtime depending error reports" parameter is set to "Y" !)
This parameter is intended especially for OEM applications to set the account value generally to be
displayed as entry confirmation.
15. Buzzer active:
16. Execute terminal test:
At this concluding point, a terminal test can be carried out in case the TRS 33xx components should
The display test checks if all of the 240x128 pixel are activated or if single pixels are defective.
To do this, the entire display is divided into two blocks of vertical stripes that can be actuated
throughout with the "ENTER" key.
Acoustic confirmation of an entry or indication of an error (factory setting).
No acoustic confitrmation / indication.
possible values: No display / Time total / Balance / Free time
possible values: Active/not active
possible values: Yes/No