Table of Contents
Advertisement
Installation and Operating Instructions TRS 33xx
6.2.6 Time total request via switch-over table
With OEM applications, a switch-over table can be defined to display the inquiry type "Time total".
An ID-card can be read without any pre-selection of a certain entry type (see also chapter 6.1.1). This
request is similar to chapter 6.2.4, except the time total inquiry is predefined permanently (see also
chapter 6.1.1).
In addition, all the entry types indicated by the softkeys are possible.
Displayed are the values actual (Act), maximum (Max) and the size of an individual data
record, separated by ID-cards and entries (hereby the entries displayed in the column
<Act> are the number of terminal-buffered offline entries at the moment, which
automatically will be sent to the time recording software, as soon as the terminal gets
online again).
By pressing any key (except F1 = Exit) another display opens:
No.:
= ID number
ISO:
= Coding of the IC-card in Hex
Disp.:
= Current information shown on the display
Stat.:
= Status (e. g. date/time of the last entry)
Home = jump to the first data record
End
= jump to the last data record
>
= next ID
?
= previous ID
F1
= Exit
45
Hide quick links:
Advertisement
Table of Contents
