Download  Print this page

Honeywell PCR325W User Manual

Wireless weather projection clock with light detector.
Hide thumbs

Advertisement

1
1
Wireless Weather
Projection Clock
with Light Detector
USER MANUAL
(PCR325W)

Advertisement

   Related Manuals for Honeywell PCR325W

   Summary of Contents for Honeywell PCR325W

  • Page 1 Wireless Weather Projection Clock with Light Detector USER MANUAL (PCR325W)
  • Page 2 INTRODUCTION Thank you for selecting the Honeywell Wireless Weather Projection Clock with Light Detector. This device includes precise time keeping, weather forecast, alarm, and temperature monitoring features that you can use from the comfort of your home. In this package you will find: •...
  • Page 3 * Sets the weekday alarm, single alarm or pre-alarm. D MODE BUTTON * Toggles between the clock modes – the time with the seconds and the time with the day of week. * Sets the clock manually. E LIGHT/SNOOZE BUTTON Activates the snooze feature, backlight and projection.
  • Page 4 N [LIGHT SENSOR] SWITCH When AC adapter is connected, position the light sensor switch to: * “AUTO” to activate an auto backlight. * “ON” to set continuous LCD backlight. * “OFF” to deactivate LCD backlight. The built-in light sensor detects the environmental light conditions.
  • Page 5 3. Position the remote sensor so that is faces the main unit (receiver), minimizing obstructions such as doors, walls, and furniture. 4. Though the remote sensors are weather-resistant, they should be placed away from direct sunlight, rain or snow. BATTERY INSTALLATION REMOTE SENSOR NOTE: Install the batteries;...
  • Page 6 TV, computer monitor, microwave, etc. The successful reception of the atomic time signal depends on the positioning and location of the clock. Always place the main unit by the window for better reception. ˚F...
  • Page 7 Always place the unit near the window. WEATHER FORECAST The weather projection clock is capable to detect an atmospheric pressure changes. Based on collected data, it forecasts the weather for the next 12 to 24 hours.
  • Page 8 3. If after 8 minutes the time signal has not been received, press the “MODE” button to set the time manually. The clock will continue to search for the WWVB time signal daily from 1:00 am to 4:30 am. When the signal has been successfully received, the time and date will be updated automatically.
  • Page 9 “ ” (Weekday alarm), “ ” (Single day alarm), and “Pre-AL” (Pre-alarm) icons will indicate which alarm mode is armed. You can enable or disable an alarm by pressing the [ + ],[ – ] buttons in alarm display mode. Press MODE to toggle between alarm modes or to return to the default display.
  • Page 10 RF Transmission Range : Maximum 100 feet Temperature sampling cycle : approximately 45 seconds Calendar and Clock 12 hour display in hh : mm format Date Format: Month – Day format Day of week: User- selectable in 3 languages (English, French, Spanish)
  • Page 11 Hideki Electronics, Inc. reserves the right to repair or replace the product at our option. Copyright (2005) Hideki Electronics Inc. All Rights Reserved. The Honeywell Trademark is used under license from Honeywell Intellectual Properties Inc. Honeywell International Inc. makes no representations or...

Comments to this Manuals

Symbols: 0
Latest comments: