How to Program your Honeywell Timetracker Timetracker™ Dual Plug , CL600A-1001 Timetracker™ Wall Switch, CL600B-1009 Timetracker™ Tabletop, CL600D-1005...
This device automatically turns your light or appliance on and off up to four times a day. Use of the Timetracker option is recommended for sunset scheduling to ensure that your light goes on at dusk, regardless of the hour at which dusk occurs.
ON OR OFF TO OVERRIDE PROGRAM, LIGHT IS ON WHEN APPLIANCE AUTO TO RESUME NORMAL PROGRAM. IS ON; OFF WHEN APPLIANCE IS OFF (INCLUDED ON CL600A-1001 AND CL600D-1005 ONLY DURING PROGRAMMING, TIMETRACKER WlLL AUTOMATICALLY LOCK 12,784 IF NONE OF THE BUlTONS ARE TOUCHED FOR SECONDS.
DETERMINE YOUR PROGRAM Fill in the times on the dial below. Start programming with your first ?ZO:ZGIG> program time after midnight. If this first time is an ON-time, start with program 1. If it is an OFF-time, skip 1, and start with 2. Continue through the day and evening, -OFF making sure that all program times...
Timetracker is normally wired or plugged in, and switched to the AUTO position. If you have any questions regarding the Timetracker, please contact 7:30 Honeywell Consumer Affairs toll-free at 1-800-468-1502, Monday-Friday, a.m.-4:00 p.m. Central time. S.M. Form Number 69-0451-2 Inc.