Raising and Lowering the MXR-1001 Touch Panel
Press the external pushbutton (with LED) to raise and lower the touch panel on the MXR-1001.
When the MXR-1001
is closed, press the
pushbutton to raise
Up/Down pushbutton
FIG. 4
If the panel is locked, the pushbutton is disabled until authentication credentials are provided (see Locking and Unlocking
the MXR-1001 on page 10).
The brightness of the pushbutton LED can be adjusted via the ^MCC Send Command (LEDBRIGHTNESS subcommand). The
panel can be raised and lowered via the (MOTOR subcommand). Refer to the Modero X® Series G5 Touch Panels
Conf iguration & Programming Manual for details
Warning Screen
When the touch panel is in motion (raising or lowering), a warning screen is displayed on the panel (FIG. 5):
MXR-1001 Warning: Panel In motion. Keep clear of opening.
FIG. 5
NOTE: If the Up/Down pushbutton is pressed while the panel is in motion, the panel will reverse direction.
Some touch panel components are automatically disabled when the panel is in the Lowered position - see the the Modero
®
X
Application windows that are open when the panel is in motion are automatically closed. Popup windows will stay opened
after the panel is completely raised and the warning message (FIG. 5) is closed.
The pushbutton can be used to raise/lower the panel even if the MXR-1001 is not connected to a Master (for example
during installation), as long as the MXR-1001 is powered.
Audio Alert
The Audio Alert feature allows the MXR-1001 to play a sound when the panel is raised, and/or a separate sound when the panel is
lowered. The Panel Lower Sound and Panel Raise Sound settings can be configured under the "Sound" Settings menu. Note that
by default, the Panel Raise sound is set to "None". Refer to the Modero X
Manual for details.
Locking and Unlocking the MXR-1001
The touch panel on the MXR-1001 can be locked and unlocked via the ^MCC Send Command (LOCK subcommand). By default, the
panel is unlocked. When the panel is locked, the Pushbutton (see FIG. 4 on page 10) is disabled.
When the MXR-1001 is unlocked, press the pushbutton to raise or lower the panel.
When the MXR-1001 is locked, the pushbutton is disabled until authentication credentials are verified. When locked, button
presses are sent to the Master for potential action via NetLinx code. If the panel drops offline while locked, the panel can
only be raised or lowered via the Motor SSH command. Note that if High Security Mode is enabled, SSH functionality will not
be available. Refer to the Modero X
MXR-1001 - Installation & Hardware Reference Manual
the panel
Series G5 Touch Panels - Conf iguration & Programming Manual for details.
®
When the MXR-1001
is open, press the
pushbutton to
lower the panel
®
Series G5 Touch Panels Conf iguration & Programming
Series G5 Touch Panels - Conf iguration & Programming Manual for details.
MXR-1001
10