Installing the MXR-1001
FIG. 10 indicates the below-surface depth requirements for the MXR-1001 (side view):
0.079" (2mm)
front
Bezel (above surface)
Mounting
mounting surface
Clamps
(x4)
15.325"
15.246"
(389.25mm)
(387.25mm)
4.196"
(106.58mm)
13.315"
(338.20mm)
Motor chassis
Dimensions of the MXR-1001 (side view, below the mounting surface)
FIG. 10
Hole Cutout Dimensions for the Mounting Surface
Refer to the following table for the dimensions of the actual hole cut out in the mounting surface, resulting from using the Router
Guide and required accessories:
mounting surface
10.701" (271.81 mm)
1.984" (50.39 mm)
Above-Surface Dimensions of MXR-1001
FIG. 11
14
MXR-1001 - Installation & Hardware Reference Manual