CHECKING THE CONNECTIONS
Verify on the cables, couplers and connectors stains,
oxidation, moisture, etc.
1.
Disconnect:
•Cable
•Coupler
•Connector
2.
Verify
•Cable
•Coupler
•Connector
Dry
Moisture
airjet
Oxidation / stains Connect and disconnect
several times.
3.
Check:
•All connections
Loose connection
NOTE:
I f c r i m p t h e p i n " 1 " o f t h e t e r m i n a l , f o l d
u p .
4.Connect:
•Cable
•Coupler
•Connector
NOTE:
Make sure all connections are tight.
5.
Check:
•Continuity
(With the multimeter)
Connect
adequately
INSPECCIÓN DE LAS CONEXIONES
NOTE:
• If there is no continuity, clean the terminals
• When checking the wire harness, perform steps
(1) through (3).
• As a quick fix, use a spray contact cleaner,
available at most parts stores.
1-5