Bearings And Oil Seals; Sealing Rings - Yamaha FZ-16 2015 Service Manual

BEARINGS AND OIL SEALS

Assemble the bearings and oil seals so that the
manufacturer's mark or numbers are visible.
When installing oil seals "1", lubricate the edges
of oil seals with a thin layer of grease lithium soap
base. In bearings, apply oil, if requested.
PREACAUCIÓN
Do not turn the bearing with compressed air, and
this will damage the surfaces

Sealing rings

Before assembling, carefully check all sealing
rings and replace that are damaged or twisted.
Always replace the sealing rings of the piston pin,
after one use. When installing a sealing ring "1",
make sure that the sharp corners "2" are placed
on the opposite side "3" to the force received by
the closing ring.
INFORMACIÓN IMPORTANTE
1-4