CHECKING THE DRIVE CHAIN
1.
Measure:
15 links of the drive chain
•
OOS Replace ויthe
chain.
Link length limit of 15
191.5 mm
a.
Measure the length "a" between the inner
faces of the roller and the length "b" between
the outer faces of the rollers 15 in a section of
the chain links of the transmission as shown
in the illustration.
b.
Calculate the length "c" of section 15 links in
the chain of transmission using the following
formula "c" = (length "a" between the inner
faces of the rollers + length "b" between the
outer faces of the rollers) / 2
NOTE:
•When measuring the segment of 15 links in the
chain of transmission, ensure that the drive
chain is taut.
•Perform the measurement in two or three
different points each time
2.
Check:
Drive chain
•
Stiffness Clean וי
replace.
and lubricate or
4-54
CADENA DE TRANSMISIÓN
3.
Clean:
Drive chain
•
a.
Clean the drive chain with a clean cloth.
b.
Sprinkle with chemical cleaner chain drive
chain and thoroughly clean.
Chain cleaner recommended for
chains with O-ring
4. Check:
• Roller transmission chain "1"
wear Replace וי
transmission.
• Side plates of the chain of transmission "2"
Damage / wear Replace ויchain
transmission.
Cracks Replace ויtransmission chain.
5.
Lubricate:
Drive chain
•
Recommended lubricant chain
lubricant suitable for O-ring
chains
Wipe excess lubricant.
Damage /
chain