Yamaha FZ-16 2015 Service Manual page 121

13. Assembly:
O-ring New
•
(The screw cap of the front fork)
•
Screw the top of the front fork
• New
Clip
BLACK:
•
Before installing the screw top of the front fork,
lubricate the O-ring with grease.
•
Before installing the screw cap of the fork
ront, lubricate the O-ring with grease.
BARS ASSY FRONT FORK
The following procedure applies to both front fork
legs
1. Assembly:
•
Delanter fork legs Temporarily tighten the
screws on the top and bottom brackets
2.
Tighten:
•
Top bracket screw "1"
Screw top bracket
25 Nm (2.5 m · kg, 18 ft · lb)
Lower bracket screw "2"
•
Screw bottom bracket
25 Nm (2.5 m · kg, 18 ft · lb)
NOTE:
•
To give the correct torque to cap screws, first
tighten the bottom bracket, then tighten the
screw cap before tightening the screw on the
top bracket.
HORQUILLA DELANTERA
WARNING
Make sure the brake hose, cable
clutch, and the cables are guided
correctly.
1
4-42
f
2