Removal Of Front Fork Bars - Yamaha FZ-16 2015 Service Manual

Strip the FRONT FORK
The following procedure applies to both front fork
legs
1.
Place the vehicle on a flat surface
WARNING
Securely support the vehicle so there is no risk
of falling.
2.
Loosen:
•
Top bracket screw "1"
• Lower bracket screw "2"
WARNING
Before loosening the screws on the top and
bottom support, hold the front fork legs.
NOTE:
To facilitate removal of the stop screws, first loosen
the top bracket, then loosen the cap slightly without
loosening the bottom bracket while the front fork is
installed in the vehicle.
2
3.
Remove:
•
Front fork legs

REMOVAL OF FRONT FORK BARS

The following procedure applies to both front fork
legs
1.
Remove:
•
Rubber cover
•
Clip "1"
•
Front fork cover "2" (with O-ring)
•
Fork spring.
HORQUILLA DELANTERA
2.
Drain:
• Fork Oil
NOTE:
Press the outer tube several times while leaving
the fork oil
3.
Remove:
• Dust "1"
Oil Seal Clip "2"
•
(With a flathead screwdriver)
CAUTION
Do not scratch the inner tube.
1
4.
Remove:
•
Screw the damper rod "1"
Damper rod
•
4-38
1
2