Tool name / nr Tool
Adapter valve spring compressor
A-803 YSST
This tool is used to remove and install the valve and the
valve spring using YSST 603.
Set gauge pump vacuum / pressure
This instrument is used to test and verify the vacuum of air
induction system.
Nut wrench address
YSST-721
This tool is used to loosen and tighten the stem nut.
Key in T-
813 YSST
This tool is used to hold the plunger of the front fork to
loosen or tighten the hex bolt.
Assembly tool oil seal front fork
YSST-875
This tool helps you to install the oil seal of the front fork.
Dynamic spark tester
This instrument is used to verify the efficiency of the spark
from the spark plug.
HERRAMIENTAS ESPECIALES
Illustration
1-8