Using An Auxiliary Monitor; Quick Setting Toolbar In Live View Mode - HIKVISION DS-7600NI-12 Series User Manual

3.2.3 Using an Auxiliary Monitor

Certain features of the Live View are also available while in an Aux monitor. These features include:
•
Single Screen: Switch to a full screen display of the selected camera. Camera can be selected from a
dropdown list.
•
Multi-screen: Switch between different display layout options. Layout options can be selected from a
dropdown list.
•
Next Screen: When displaying less than the maximum number of cameras in Live View, clicking this feature
will switch to the next set of displays.
•
Playback: Enter into Playback mode.
•
PTZ Control: Enter PTZ Control mode.
•
Main Monitor: Enter Main operation mode.
In the live view mode of the main output monitor, the menu operation is not available while Aux output mode is
enabled.

3.2.4 Quick Setting Toolbar in Live View Mode

On the screen of each channel, there is a quick setting toolbar which shows when you single click the mouse in the
corresponding screen.
The fisheye expansion view feature is supported by the DS-7600/7700/8600/9600-I (/P) series NVR only.
Icon Description
Enable/Disable
/
Manual Record
Capture
Image Settings
Information
Instant Playback only shows the record in last five minutes. If no record is found, it means there is no record
during the last five minutes.
Digital Zoom is for zooming in the live image. You can zoom in the image to different proportions (1 to16X)
Network Video Recorder User Manual
Figure 3. 2 Quick Setting Toolbar
Table 3. 4 Description of Quick Setting Toolbar Icons
Icon Description Icon
Instant Playback
PTZ Control
Face Detection
Fisheye
Expansion
57
Description
Mute/Audio on
/
Digital Zoom
Live View
Strategy
Close