Quick Setting Toolbar In Live View Mode - HIKVISION DS-7100NI-K1 Series User Manual

Name
Common Menu
Menu
Single Screen
Multi-screen
Previous Screen
Next Screen
Start/Stop
Auto-switch
Start Recording
Add IP Camera
Playback
Output Mode
Aux Monitor
The dwell time of the live view configuration must be set before using Start
Auto-switch.
The right-click menu varies according to different models, please refer to the actual
GUI menu of the device.

Quick Setting Toolbar in Live View Mode

On the screen of each channel, there is a quick setting toolbar which shows when
you single click the mouse in the corresponding screen.
Network Video Recorder User Manual
Mouse Operation in Live View
Description
Quick access to the sub-menus which you frequently visit.
Enter the main menu of the system by right clicking the
mouse.
Switch to the single full screen by choosing channel number
from the dropdown list.
Adjust the screen layout by choosing from the dropdown list.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
Start continuous recording or motion detection recording of
all channels.
Enter the IP Camera Management interface, and manage the
cameras.
Enter the playback interface and start playing back the video
of the selected channel immediately.
Four modes of output supported, including Standard, Bright,
Gentle and Vivid.
The NVR checks the connection of the output interfaces to
define the main and auxiliary output interfaces. The priority
level for the main and aux output is HDMI > VGA
When both the HDMI and VGA are connected, the HDMI is
used as main output and the VGA is used as the aux output.
36