Enter the device name, IP address, user name and the password of the camera. Edit port No.
and channel No.
Exit the page to save the settings.
- Select Open Network Video Interface to add the camera.
Enter the device name, IP address, user name and the password of the camera.
Exit the page to save the settings.
3.3.7 Zone and Alarm Settings
Zone Settings
You can set the zone type, alarm type and delay time and other parameters of 8 zones.
Before You Start
Tap Settings →
→ Shortcut Settings , and enable Alarm.
Steps
Note
Arming status page and zone settings page are hidden by default. You should enable alarm function
first.
1. Tap Settings →
Network Indoor Station Configuration Guide
→ Zone Settings to enter the zone settings page.
Figure 3-24 Zone Settings
23