ELECTRO FREEZE CS700-FG Operator's Manual page 24

ELECTRO FREEZE Shake Model CS700-FG
6.2 Disassembly Instructions
Figure 6-3 Beater Shaft Assembly
6. Remove the plunger (6, figure
6-2) and the O-rings from the head and
plunger (3,4,5).
7. Remove the head bushing (2)
and beater shaft (figure 6-3) from the
cylinder. Then remove the scraper blades
(2) and shaft seal (3) from the beater
shaft (1). Remove the drip tray.
8. Remove the mix feed tube from
the hopper, as shown in Figure 6-4 and
remove the o-rings (4).
9. Wipe off all lubricants with paper
towel.
14
— continued
4
3
SEAL CUP- BEATER SHAFT
BEATER - ASSY.
1
SHAKE SHORT
2
BLADE - SHAKE SCRAPER
Tube-Mix Feed
O-Ring
Figure 6-4 Diassemble Mix Feed Tube
3 SEAL CUP- BEATER SHAFT
WASHER - BEATER SHAFT
O-Ring
Insert-Assy. Mix
Feed
185231-17