Disassembling The Final Drive Assembly - Yamaha XVZ13TF 1999 Service Manual

FINAL DRIVE
EAS00724
DISASSEMBLING THE FINAL DRIVE AS-
SEMBLY
1. Remove:
S ring gear bearing housing nuts
S ring gear bearing housing bolts
NOTE:
Working in a crisscross pattern, loosen each nut
1/4 of a turn. After all of the nuts are fully loos-
ened, remove them and the bolts.
2. Remove:
S self-locking nut
S gear coupling
(with the special tool 1 )
Final drive shaft holder
YM-01229, 90890-01229
3. Remove:
S bearing retainer
(with the special tool 1 )
Final drive shaft bearing
retainer wrench
YM-04050, 90890-04050
CAUTION:
The bearing retainer has left-hand threads.
To loosen the bearing retainer, turn it clock-
wise.
4. Remove:
S final drive pinion gear
WARNING
Always use new bearings.
CAUTION:
The final drive pinion gear should only be re-
moved if ring gear replacement is neces-
sary.
NOTE:
Lightly tap on the end of the final drive pinion
gear with a soft hammer.
7-85
CHAS