Yamaha XVZ13TF 1999 Service Manual page 65

I Fasten the regulator lead with a steel clamp.
J Route the rear brake switch lead between the
wire harness and cover.
K Fasten the side stand switch lead, fan motor lead
and noise filter lead with a plastic clamp.
L Route the side stand switch lead, fan motor
lead and noise filter lead inside the pipe.
Make sure that the leads are not come out of the
pipe.
M Fasten the cruise control cable and wire harness
with a plastic clamp.
N Route the cruise control cable and wire har-
ness outside of the steel clamp.
CABLE ROUTING
O Align the white mark on the rear brake switch
lead with the metal clamp.
2-31
SPEC