Yamaha XVZ13TF 1999 Service Manual page 72

Plastic clamp
1
Emergency stop switch
2
Bolt (ground)
3
Platic clamp
4
Bolt (ground)
5
Carburetor heater relay
6
Flasher relay
7
Thermo switch
8
High tension code
9
AIS hose
10
Coolant reservoir hose
11
CABLE ROUTING
A Route the high tension cord throgh the guide on the air induction box.
B Clamp the coolant hose inside of the motorcycle with hose clamp.
C Fasten the audio lead and CD lead (option) with a plastic clamp.
D Route the audio lead tensely.
E To the fuel tank.
F Fasten the wire harness sub lead with a plastic clamp.
G To the upper cowling.
H Fasten the audio lead, CD lead (option) and ground lead with a plastic
clamp.
I Fasten the ground lead and engine stop switch lead.
J To the under cowling.
K Insert the hose through the metal clilp.
L To the AIS.
2-38
SPEC