Checking The Pressure Plate; Checking The Clutch Push Rods; Installing The Clutch - Yamaha XVZ13TF 1999 Service Manual

CLUTCH
EAS00286

CHECKING THE PRESSURE PLATE

1. Check:
S pressure plate 1
Cracks/damage ! Replace.
S bearing 2
Damage/wear ! Replace.
EAS00288

CHECKING THE CLUTCH PUSH RODS

1. Check:
S short clutch push rod 1
S O-ring 2
S ball 3
S long clutch push rod 4
Cracks/damage/wear ! Replace the de-
fective part(-s).
EAS00300

INSTALLING THE CLUTCH

1. Install:
S clutch spring plate 1
S friction plate 2
S clutch plate 3
S wire circlip (New) 4
NOTE:
Install the clutch spring plate with the "OUT-
SIDE" mark facing towards the clutch cover.
2. Tighten:
S clutch boss nut 1
NOTE:
While holding the clutch boss 2 with the univer-
sal clutch holder 3 , tighten the clutch boss nut.
Universal clutch holder
YM-91042, 90890-04086
3. Bend the lock washer tab along a flat side of
the nut.
4. Lubricate:
S friction plates
S clutch plates
(with the recommended lubricant)
Recommended lubricant
Engine oil
4-51
ENG
70 Nm (7.0 mSkg)