Finishing VSM
Note
When using normally, do not finish VSM. When closing the VSM window, click [Settings] - [Close].
Windows8.1
Click the Down Arrow in the [Start] screen.
Click [ValueJet Status Monitor].
Printing area
Printing is always started from Origin position (print start point).
See the figure below as example.
Printable Area
Right click the VSM icon in the task tray, and click [Exit].
Media Width
a
c
d
b
a
a=5 mm *1
b=5 mm to 25 mm (According to the Operation panel settings)
c=5 mm
*1
d=5 mm to 25 mm (According to the Operation panel settings)
*1 When the output mode is set to "Take Up", the margin
between pages to "Narrow".
When the page gap is set to "Normal" (factory default),
the gap (a + c) will be approx. 58mm.
Printing area
23