Fog light, FR version
Fog light: access to the connector
Fig. 214
and to the light bulb holder.
Fog light: access to the connector
Fig. 215
and to the light bulb holder.
›››
Remove the 3 bolts
Fig. 214
–
1
inside of the wheel housing and the 2 bot-
›››
tom bolts
Fig. 214
from the bumper
2
with the help of a screwdriver.
Fuses and bulbs
Pull the wheel housing
–
cess the 2 hidden screws
the bumper.
Remove the screws using a screwdriver.
–
Pull the bumper to release it from its an-
–
chorages to access the connector and the
light bulb holder.
Note
Due to the difficulty of accessing fog light
bulbs, have them replaced at a Technical
Service or specialised workshop.
Remove the bulb holder
Front fog light.
Fig. 216
from the
Remove connector
–
bulb.
Turn the bulb holder
–
clockwise and pull.
›››
Fig. 215
ac-
Remove the bulb by pressing on the bulb
3
–
›››
Fig. 215
of
holder and turning it anti-clockwise at the
4
same time.
Installation involves all of the above steps
–
in reverse sequence.
Check that the bulb works properly.
–
Changing tail light bulbs (on
side panel)
Overview of tail lights
Rear lights on the side panel
Turn signal
Side light and brake light
›››
Fig. 216
from the
1
›››
Fig. 216
anti-
2
PY21W NA LL
P21W LL
237