Changing The Side And Interior Bulbs - Seat Ibiza Owner's Manual

232 If and when
If the brake light and/or side light with LEDs have to be replaced, the tail
light must be replaced.

Changing the side and interior bulbs

Side turn signal bulbs
– Press the turn signal to the left or to the right to remove the
bulb.
– Remove the bulb holder from the turn signal.
– Remove the failed bulb and replace with a new bulb.
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First fit the turn signal in the opening in the chassis, fastening
⇒ F ig.
the tabs 184, and then fit in the bulb as shown by the
1
⇒ F ig.
arrow 184.
2
Applies to the model: IBIZA / IBIZA SC
 Number plate light
– Insert the flat part of a screwdriver into the special slot and re-
move the bulb.
– Remove the bulb holder, by turning it until it is free.
– Change the bulb.
– Replace the bulb holder, by turning it until it fits fully.
– Fit the light into the space and press until you hear a "click".
Applies to the model: IBIZA ST
Number plate light
Fig. 184 Turn signals.
– Insert the flat part of a screwdriver into the special slot and re-
move the number plate light from its moulding.


Fig. 185 Remove the
number plate light.
