Seat IBIZA ST Owner's Manual page 138

136 Air conditioning
WARNING
For your safety, the windows should never be fogged up or covered with
snow or ice. This is essential to ensure good visibility. Please familiarise
yourself with the correct operation of the heating and ventilation system,
including the demist/defrost functions for the windows.
Note
Please consider the general notes.
Vehicle interior heating or cooling system
Interior heating
– Disconnect the cooling system using button
button light turns off).
– Turn the temperature selector
inside the vehicle.
– Turn the blower switch to any of the settings 1-4.
– Set the air distribution control
desired:

footwell areas).

Interior cooling
– Connect the cooling system with button
should light up).
– Turn the temperature control switch until the desired interior
temperature is reached.
– Turn the blower switch to any of the settings 1-4.
– Set the air distribution control to the air flow configuration de-
sired:
(towards the footwell) and
footwell areas).
Heating
Maximum heat output, which is needed to defrost the windows quickly, is
Fig. 103 Air condition-
only available when the engine has reached its operating temperature.
ing controls on the dash
panel
Coolant system
When the air conditioning is switched on, the temperature and the air hu-
midity go down. This way, if the outside humidity is extreme, the air condi-
⇒ f ig. 103
(the
AC
tioning prevents the misting of the windows and therefore, comfort is im-
proved.
If the air conditioning does not work, this may be due to the following rea-
sons:
to set the desired temperature
A
to the air flow configuration
C
(towards the windscreen),

(towards the footwell) and (towards the windscreen and

(towards the windscreen),

(towards the windscreen and

(towards the chest),

(the button light
AC
(towards the chest),
 
