Seat IBIZA ST Owner's Manual page 240

238 If and when
Dipped beam headlights
– Raise the bonnet.
⇒ f ig. 161
– Move the loop
remove the cover.
Fig. 161 Dipped beam
headlights
Fig. 162 Dipped beam
headlights
in the direction of the arrow and
1
⇒ f ig. 162
– Remove the connector
⇒ f ig. 162
– Unclip the retainer spring
right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
– Fit the connector.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Turn signal lights
– Raise the bonnet.
from the bulb.
2
pressing inwards to the
3

Fig. 163 Turn signal
