Interior Light And Front Reading Lights; Additional Brake Lights - Seat IBIZA ST Owner's Manual

Interior light and front reading lights

To remove the glass
– Insert a fine screwdriver between the casing and the glass
⇒ f ig.
175.
– Carefully remove the glass, levering it to avoid possible dam-
age.
To replace the bulbs
– Pull the bulbs outwards.
– To remove the central bulb, hold and press to one side.
Assembly
– Proceed in the reverse order, pressing gently on the outer edge
of the side light.
Safety First
Fig. 175 Front reading
light
Operating Instructions
– First fit the glass with the fastening tabs over the frame of the
switch. Next press the front part until the two long tabs click on
the support.

Additional brake lights*

Given the difficulty involved in the replacement of this light it should be
done by the Technical Service.
Practical Tips
If and when


Technical Specifications
245