Seat IBIZA ST Owner's Manual page 166

164 Driving
When the cruise control is on and a speed is programmed, the indicator 
on the instrument panel is lit.
If the cruise control system is switched off, the  symbol is switched off.
The system will also be deactivated completely when 1st gear is selected.*
Setting speed*
– Press the lower part SET of the rocker switch
briefly when you have reached the speed you wish to set.
When you release the rocker switch, the current speed is set and held con-
stant.
1)
Depending on the model version
1)
Fig. 121 Turn signal and
main beam headlight lev-
er: switch and rocker
switch for the cruise con-
trol
⇒ f ig. 121
Adjusting set speed*
The speed can be altered without touching the accelerator or
the brake.

Setting a higher speed
– Press the upper part RES of the rocker switch
increase the speed. The vehicle will continue to accelerate as
long as you keep the rocker switch pressed. When you release
once
B
the switch, the new speed is stored.
Setting a lower speed
– Press the lower part SET– of the rocker switch

speed. The vehicle will automatically reduce its speed for as
long as you keep the switch pressed. When you release the
switch, the new speed is stored.
Fig. 122 Turn signal and
main beam headlight lev-
er: switch and rocker
switch for the cruise con-
trol
⇒ f ig. 122
to
B
to reduce the
B
