Table of Contents
Advertisement
4.9.5.a. IPv4 Ping Execution
On the Ping Execution Menu, pressing "4" opens the IPv4 Ping Execution
screen, as shown in Fig. 4-9-8. On this screen, you can execute the IPv4 ping
command from the Switching Hub to confirm communications with
connected terminals and other devices.
PN28160K Local Management System
Ping Execution -> IPv4 Ping Execution
Target IP Address:
Number of Requests:
Timeout Value:
=============== Result ===============
-------------------------------- <COMMAND> -----------------------------------
Set Target [I]P Address
Set [N]umber of Requests
Set [T]imeout Value
Command>
Enter the character in square brackets to select option
Screen Description
Target IP Address:
Shows the IP address of the target of the ping. The factory default
setting is 0.0.0.0.
Number of
Shows the number of times of ping. The factory default setting is 10
Request
times.
Timeout Value
Shows the time before timeout occurs. The factory default setting is
3 seconds.
Result
Shows the ping result.
0.0.0.0
10
3 Sec.
[E]xecute Ping
[S]top Ping
[Q]uit to previous menu
Fig. 4-9-8 IPv4 Ping Execution
244
Advertisement
Table of Contents
