Table of Contents
Advertisement
4.6.2. System IP Configuration
On the Basic Switch Configuration Menu, pressing "I" opens the System IP
Configuration Menu, as shown in Fig. 4-6-3. On this screen, you can set
IP-address-related settings for this Switching Hub.
PN28160K Local Management System
Basic Switch Configuration -> System IP Configuration Menu
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
-------------------------------- <COMMAND> -----------------------------------
Set [I]P Address
Set Subnet [M]ask
Set Default [G]ateway
Set IP P[a]rameter
Set I[P]v6 Address
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
MAC
Shows the MAC address of the Switching Hub.
Address
This value is a unique identifier assigned to the device. It cannot be
changed.
IP Address
Shows the current IP address.
0.0.0.0 is displayed because no address is set on shipment.
Subnet Mask
Shows the current subnet mask.
0.0.0.0 is displayed because no address is set on shipment.
Default
Shows the IP address of the router, set as a current default gateway.
Gateway
0.0.0.0 is displayed because no address is set on shipment.
xx:xx:xx:xx:xx:xx
0.0.0.0
0.0.0.0
0.0.0.0
Fig. 4-6-3 System IP Configuration
41
Advertisement
Table of Contents
