Port Monitoring Config - Panasonic PN28240i Operation Manual

3.2.9.

Port Monitoring Config

Select "Advanced Config" and "Port Monitoring Config" to open the screen shown
in Figure 3-34. On this screen, you can configure the port monitoring settings.
Screen Description
Monitor Output
Monitor Target
Monitor Direction
Monitor Status
Note: Mirror packets in transmission direction will include the VLAN tag of the
received VLAN ID.
Figure 3-34 Port Monitoring Config
Displays the port number of a port at which packets from other ports can be
monitored.
Displays the port number of a port to be monitored.
Displays which of transmit and receive packets are monitored at the port to be
monitored.
"Send/Recv" is the factory default setting.
Send Monitors transmit packets.
Recv Monitors receive packets.
Send/Recv Monitors both transmit and receive packets.
Displays whether monitoring is enabled.
"Disable" is the factory default setting.
Enable Monitors packets.
Disable Does not monitor packets.
59