System Security Configuration - Panasonic PN28160K Operation Manual

4.6.7. System Security Configuration

On the Basic Switch Configuration Menu, pressing "S" opens the System
Security Configuration screen, as shown in Fig. 4-6-24. On this screen, you
can configure the access control settings to this Switching Hub for
configuration and management.
PN28160K Local Management System
Basic Switch Configuration -> System Security Configuration
Console UI Idle Timeout:
Telnet UI Idle Timeout:
Telnet Server:
SNMP Agent:
IP Setup Interface:
Local User Name:
Syslog Transmission:
Login Method 1/2:
-------------------------------- <COMMAND> -----------------------------------
Set [C]onsole UI Time Out
Set [T]elnet UI Time Out
Enable/Disable Te[l]net Server
Enable/Disable [S]NMP Agent
[I]P Setup Interface
Enable/Disable S[y]slog Transmission SS[H] Server Configuration
Syslo[g] Transmission Configuration
Telnet [A]ccess Limitation
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-6-24 System Security Configuration
5 Min.
5 Min.
Enabled Web Server Status: Enabled
Disabled
Enabled
manager
Disabled
Local/None Method 1 Fail Action: Method 2
Change Local User [N]ame
Change Local [P]assword
[R]ADIUS Configuration
L[o]gin Method
Login [M]ethod 1 Fail Action
LED [B]ase Mode Configuration
[W]eb Server Status
84