Table of Contents
Advertisement
Available commands are listed below.
N
Set/edit the system name.
Press "N." The command prompt changes to "Enter system name>." Enter a
Switching Hub name in 50 one-byte characters or less.
L
Set/edit the installation location information.
Press "L." The command prompt changes to "Enter system location>." Enter a
Switching Hub location in 50 one-byte characters or less.
C
Set/edit the contact information.
Press "C." The command prompt changes to "Enter system contact>." Enter contact
information in 50 one-byte characters or less.
Q
Return to the previous menu.
40
Advertisement
Table of Contents
