Table of Contents
Advertisement
Screen Description
User Name
Displays the user name.
Password
Displays the password.
Displays [encrypted] if the password is encrypted.
VLAN
Displays the VLAN ID to be assigned after authentication.
Auth Type
Displays the authentication type to use the account.
WEB
802.1X
Both
Available commands are listed below.
N
Display the next page.
Press "N" to display the next page.
P
Display the previous page.
Press "P" to display to the previous page.
A
Create a local user.
Press "A." The command prompt changes to "Enter new user name >." Enter a user
name in 32 alphanumeric characters or less. After the entry, the command
prompt changes to "Enter new password >." Enter a password in 32 alphanumeric
characters or less. After the entry, the command prompt changes to "Enter VLAN
ID >." Enter a VLAN ID to be assigned after authentication with an integer
between 1 and 4094. After the entry, the command prompt changes to "Enter
Auth Type for Local User (W/X/B)>." Press "W" to use only in WEB authentication,
"X" to use only in IEEE802.1X access control, or "B" to use in both.
D
Delete a local user.
Press "D." The command prompt changes to "Enable or Disable global WEB auth
status (E/D)>." Press "E" to enable the status or "D" to disable it.
E
Create a local user whose password is encrypted.
Press "E." The command prompt changes to "Enter new user name >." Enter a user
name in 32 alphanumeric characters or less. After the entry, the command
prompt changes to "Enter new password >." Enter a password in 32 alphanumeric
characters or less. After the entry, the command prompt changes to "Enter VLAN
ID >." Enter a VLAN ID to be assigned after authentication with an integer
between 1 and 4094. After the entry, the command prompt changes to "Enter
Auth Type for Local User (W/X/B)>." Press "W" to use only in WEB authentication,
"X" to use only in IEEE802.1X access control, or "B" to use in both.
V
Change the VLAN ID of the local user.
Press "W." The command prompt changes to "Enter new user name >." Enter a
user name in 32 alphanumeric characters or less. After the entry, the command
prompt changes to "Enter VLAN ID >." Enter a VLAN ID after change with an
integer between 1 and 4094.
T
Change the authentication type of the local user.
Press "T." The command prompt changes to "Enter new user name >." Enter a user
name in 32 alphanumeric characters or less. After the entry, the command
prompt changes to "Enter Auth Type for Local User (W/X/B)>." Press "W" to use
only in WEB authentication, "X" to use only in IEEE802.1X access control, or "B" to
use in both.
Q
Return to the parent menu.
The account is used only in WEB authentication.
The account is used only in 802.1X access control.
The account is used both in 802.1X access control
and WEB authentication.
170
Advertisement
Table of Contents
