4.6.9. Time Configuration
In this Switching Hub, it is possible to set the exact time by synchronizing the
internal clock to an external SNTP server's clock with a support of SNTP
(Simple Network Time Protocol).
On the Basic Switch Configuration Menu, pressing "T" opens the Time
Configuration Menu, as shown in Fig. 4-6-37. In this screen, you can
configure the time setting and time synchronization setting by SNTP.
PN28160K Local Management System
Basic Switch Configuration -> Time Configuration Menu
Time ( HH:MM:SS )
Date ( YYYY/MM/DD ) : 2001/01/01
SNTP Server IP
SNTP Server IPv6
SNTP Polling Interval : 1440 Min
Time Zone : (GMT+09:00) Osaka,Sapporo,Tokyo
Daylight Saving
-------------------------------- <COMMAND> -----------------------------------
Set [C]lock Time
Set SNTP Server I[P]
Set SNTP [I]nterval
Set Time [Z]one
S[e]t Daylight Saving
Set SNTP [S]erver IPv6
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-6-37 Configuring of Time Synchronization Function:
: 12:13:13
Monday
: 0.0.0.0
: ::
: N/A
before configuration
106