Except when measuring voltage, all measurements must be made on
powered-off systems. Therefore check to ensure there is no voltage on
the system under test before making a non-voltage measurement. When
the rotary switch is set to the voltage or an insulation testing position,
the instrument measures and displays any voltage present at the input
terminals prior to the user pressing the test button.
2.1 Setting up the instrument
2.1.1 Configuration Settings
> 2s
In Set-Up mode, the ▲ button performs the following functions:
1
press
st
on
10
Shop for Data Logging products online at:
2. oPeration
A >2 second press of the SET-UP button enables you to
change configuration settings on the instrument. You can
then use the ▲ and ► buttons to scroll through and modify
parameters.
DataLoggerStore
www.
The alarm buzzer is active. To
deactivate it:
1. Press . On will blink to
indicate it is selected.
2. Press to change the
setting to OFF.
3. Press to validate the
change.
The
symbol disappears from the
display when you exit Set-Up.
Note that this setting reverts to On
when you turn OFF the instrument.
Megohmmeter Model 6536
1.877.766.541
.ca