Remote Control Probe (Optional) - AEMC 6536 User Manual



TEST

2.2.2.3 remote Control Probe (optional)

The optional remote control probe is used to trigger the measurement using the
TEST button on the probe. To use this accessory, refer to its separate operating
instructions.
When the probe is connected, the
instrument's LCD.
20
Shop for Data Logging products online at:
M
DAR
M
Successive presses on the  button display intermediate
values. These include:
■ programmed time
■ voltage at the end of the measurement
■ current at the end of the measurement
Press the TEST button to return to voltage measurement.
www.
symbol is displayed on the
Megohmmeter Model 6536
DataLoggerStore
DAR
V
DC
1.877.766.541
.ca