Maintenance & Troubleshooting; Maintenance; Cleaning; Replacing The Batteries - AEMC 6536 User Manual

4. MaintenanCe & trouBLeSHootinG
Except for the batteries, the instrument contains no parts that can
be replaced by personnel who have not been specially trained and
accredited. Any unauthorized repair or replacement of a part by an
"equivalent" may impair safety.

4.1 Maintenance

4.1.1 Cleaning

Disconnect the unit completely and turn the rotary switch to OFF.
Use a soft cloth, dampened with soapy water. Rinse with a damp cloth and
dry rapidly with a dry cloth or forced air. Do not use alcohol, solvents, or
hydrocarbons.
Do not use the instrument again until it is completely dry.

4.1.2 replacing the Batteries

At start-up, the instrument displays the remaining battery life:
If the battery voltage is too low to ensure correct operation of the instrument, a
"low battery" message appears on the LCD and the
Megohmmeter Model 6536
Shop for Data Logging products online at:
DataLoggerStore
www.
G VHz %
symbol blinks:
.ca
37
1.877.766.541