Hold Function - AEMC 6536 User Manual

If the measured value is less than the stored value, the display becomes
negative.
You can display the difference as a percentage of the reference (
100) by pressing the  button until the % sign appears:
For insulation measurements, only the digital display is modified by ∆REL.
The bar graph continues to display the true measured value.
To deactivate the ∆REL function, press the ∆REL button during an active
measurement, or turn the rotary switch to another setting.

2.1.4 HOLD function


14
Shop for Data Logging products online at:
Pressing the HOLD button freezes the display of the
measurement. This can be done in all functions except during a
timed measurement (
To unfreeze the display, press the HOLD button again.
www.
V
M
REL
%
M
REL
).
Megohmmeter Model 6536
DataLoggerStore
G
G
1.877.766.541
.ca
x