Terminals; Function Buttons - AEMC 6536 User Manual

1.7 terminals

The instrument has one positive ( + ) terminal and one negative ( - ) terminal. The
negative terminal also supports the remote probe accessory (see § 2.2.2.3).

1.8 function Buttons

Several keys have two functions. One is marked on the key, and is enabled via
a short press. The second function is marked under the key, and is enabled by a
long (>2 seconds) press.
BUTTON
HOLD
SET-UP
 
∆Rel
8
Shop for Data Logging products online at:
DESCRIPTION
Selects the and
Toggles backlighting ON and OFF (§ 2.1.5).
Freezes/unfreezes the displayed measurement on the LCD (§
2.1.4).
Accesses the instrument's setup parameters and information (§
2.1.1).
Applies lead compensation in continuity testing (§ 2.2.3.1).
Activates/deactivates alarms (§ 2.1.2).
The  and  keys allow you to:
■ Modify the display and program the durations of
insulation measurements (§ 2.2.2.2).
■ Choose the continuity test current (§ 2.2.3).
■ Program the alarm thresholds (§ 2.1.2).
Displays the difference between the present measurement and a
stored reference measurement (§ 2.1.3).
www.
> 700V
600V CAT IV
Figure 3
functions (§ 2.2.2).
Megohmmeter Model 6536
DataLoggerStore
1.877.766.541
.ca