Recommended Service Intervals; Record Your Settings; Torque Values - Rock Shox 30 Service Manual

R e c o m m e n d e d S e r v i c e I n t e r v a l s
Regular service is required to keep your RockShox® product working at peak performance. Follow this maintenance schedule and install the service
parts included in each service kit that corresponds with the Service Hours Interval recommendation below. For spare part kit contents and details,
refer to the RockShox Spare Parts Catalog at www.sram.com/service.
Service Hours Interval
Every ride
Every 50 Hours
Every 200 Hours
R e c o r d Y o u r S e t t i n g s
Use the table below to record your suspension settings to return your suspension to its pre-service settings. Record your service dates to track
service intervals.
Service Hours Interval
50
100
150
200
T o r q u e V a l u e s
Part
Top caps
Bottom bolts
Set screw - remote cable stop collar
(Judy™ Gold RL R)
Pinch bolt - remote cable stop clamp
(Recon™ Gold RL R)
Retaining screw - compression knob and remote spool
(30™, Recon, Judy TK)
Retaining screw - compression knob
(Judy RL)
Retaining screw - remote spool
(Judy RL R)
Maintenance
Clean dirt from upper tubes and wiper seals.
Perform lower leg service
Perform damper and spring service
Date of Service
Benefit
Extends wiper seal lifespan
Minimizes damage to upper tubes
Minimizes lower leg contamination
Restores small bump sensitivity
Reduces friction
Extends bushing lifespan
Extends suspension lifespan
Restores small bump sensitivity
Restores damping performance
Air Pressure
Tool
24 mm socket
5 mm hex bit socket
2 mm hex bit socket
2 mm hex bit socket
2.5 mm hex bit socket
2.5 mm hex bit socket
2.5 mm hex bit socket
Rebound setting - Count the
number of clicks while turning
the rebound adjuster fully
counter-clockwise.
Torque
12.4 N•m (110 in-lb)
6.8 N•m (60 in-lb)
0.25 - 0.6 N•m (2.2 - 5.3 in-lb)
0.6 - 1.1 N•m (6 - 10 in-lb)
1.35 N•m (12 in-lb)
1.35 N•m (12 in-lb)
0.9 N•m (8 in-lb)

Recommended Service Intervals

8